| SPECIFICATIONS | |
|---|---|
| VALVE SIZES | 2" TO 250" |
| CLASS RATINGS | CLASS 150 TO 2500, API 6A PRESSURE CLASSES |
| END CONNECTIONS | FLANGED (RF, RTJ), BWE, THREADED ENDS, HUB ENDS |
| TYPE OF DESIGN | 3PD, 2-WAY, 3-WAY, FLOATING / TRUNNION BALL, SIDE ENTRY / TOP ENTRY BALL |
| PORT TYPE | FULL OR REDUCED |
| OPERATION | SUBSEA GEAR INCLUSIVE OF ROV DEVICE, ROV, HYDRAULIC ACTUATOR |
| ACTUATOR ACCESSORIES | HYDRAULIC SOLENOID VALVE, HYDRAULIC LIMIT SWITCH, HYDRAULIC FILTER REGULATOR, ROV ACCESSORIES |
| SPECIAL REQUIREMENTS | CAST OR FORGED BODY CONSTRUCTION, METAL SEATED, SPE / DPE DESIGN, DOUBLE BLOCK AND BLEED (DBB) DESIGN, SINGLE / DOUBLE ISOLATION (SIB , DIB) DESIGN, EMERGENCY SHUTDOWN, PIG LAUNCHING & RECEIVING, BLOW OUT PROOF STEM, ANTISTATIC DEVICE, FIRE SAFE DESIGN, ENP/ TCC & OVERLAY ON BODY, BALL & SEAT, CAVITY RELIEF, DUAL STEM SEAL. |
| TYPE OF BONNET | BOLTED BONNET, FULLY WELDED BODY |
| STANDARD | REFERENCE |
|---|---|
| DESIGN | API 6DSS / API 17D / Manuf. Standard |
| FACE TO FACE | ASME B16.10, API 6D |
| END CONNECTION | ASME B16.25, ASME B1.20.1, ASME B16.5, ASME B16.47 SER - A / B, API 6A |
| TESTING | API 598, API 6D, API 6DSS |
| NACE COMPLIANCE | NACE MR 0175 / ISO 15156, NACE MR 0103 |
| PT RATING | ASME B16.34 |
| MATERIAL OF CONSTRUCTION | |
|---|---|
| BODY/ END CONNECTOR | CARBON STEEL, LOW ALLOY STEEL, STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, OTHER SUITABLE MATERIALS FOR SEAWATER SERVICE |
| TRIM | STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, OTHER SUITABLE MATERIALS FOR SEAWATER SERVICE |
| SEATRING | PTFE, RPTFE, FILLED PTFE, DEVLON, PEEK, NYLON, METAL to METAL |
| PACKINGS AND SEALS | PTFE, RPTFE, GRAPHITE, GRAPHOIL, SPECIAL MATERIALS FOR SEA WATER APPLICATION |
| GASKET | PTFE, RPTFE, GRAPHITE, GRAPHOIL, SPIRAL WOUNDED GASKETS, SOFT IRON METAL RING GASKETS, SPECIAL MATERIALS FOR SEA WATER APPLICATION |
| SPRING | STAINLESS STEEL, INCONEL 625, INCONEL 825, INCONEL X-750, CHROME STEEL, HIGH NICKEL ALLOY SPRINGS |
| FASTENERS | ASTM A193 Gr.B7/A194 Gr.2H, B7M/2HM, B8/8, B8M/8M, B16/2H |
