| SPECIFICATIONS | |
|---|---|
| VALVE SIZES | 1/2" TO 250" |
| CLASS RATINGS | CLASS 150 TO 2500 |
| END CONNECTIONS | FLANGED (RF, FF, RTJ), BWE, SOCKET WELD ENDS, THREADED ENDS |
| DESIGN TYPES | 1PD, 2PD, 3PD, FLOATING BALL, TRUNNION BALL, TOP ENTRY / SIDE ENTRY, BOLTED / FULLY WELDED BODY, MULTI WAY |
| PORT TYPE | FULL & REDUCED |
| OPERATOR | MANUAL, PNEUMATIC, HYDRAULIC & ELECTRIC ACTUATORS |
| ACTUATOR ACCESSORIES | LIMIT SWITCH, AIR FILTER REGULATOR, SOLENOID VALVE, POSITIONER, VOLUME BOOSTER, QEV, PLC & SCADA CONTROL SYSTEM |
| SPECIAL REQUIREMENTS | METAL TO METAL SEATING, LOCKING ARRANGEMENT, OBTURATOR POSITION INDICATOR, SPECIAL PAINTING FOR OXYGEN SERVICE, CAVITY PRESSURE RELIEF, DRAIN & VENT PROVISION, EXTENDED STEM DESIGN. |
| STANDARD | REFERENCE |
|---|---|
| DESIGN | ISO 17292, API 608, API 6D, API 603, ASME B16.34 |
| FACE TO FACE | ASME B16.10, API 6D, MANUFACTURING STANDARD |
| END CONNECTION | ASME B16.11, ASME B1.20.1, BS 21, ASME B16.5, ASME B16.25, ASME B16.47 |
| TESTING | API 598, BS EN 12266 - 1 & 2, BS 6755 PART-1, ISO 5208 |
| NACE COMPLIANCE | NACE MR 0175 / ISO 15156, NACE MR 0103 |
| PT RATING | ASME B16.34 |
| MATERIAL OF CONSTRUCTION | |
|---|---|
| BODY & END CONNECTOR | STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS. |
| TRIM | STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS. |
| SEAT RINGS | PTFE, RPTFE, FILLED PTFE, DEVLON, PEEK, NYLON, METAL to METAL |
| SEALS & PACKINGS | NBR, HNBR, VITON, EPDM, PTFE, RPTFE, FILLED PTFE, DEVLON, PEEK, NYLON |
| GASKET | PTFE, RPTFE, FILLED PTFE, DEVLON, PEEK, NYLON, SPIRAL WOUNDED GASKETS, SOFT IRON METAL RING GASKETS, SPECIAL MATERIALS. |
| BEARING | STAINLESS STEEL + BACKED PTFE |
| FASTENERS | ASTM A193 Gr.B8/8, B8M/8M, INCONEL, MONEL |
| SPRINGS | STAINLESS STEEL, INCONEL, MONEL, HIGH NICKEL ALLOYS |
